Vstřikovýfuk

Injection blow moulding is used for the Production of hollow objects in large quantities. The main applications are bottles, jars and other containers. The Injection blow moulding process produces bottles of superior visual and dimensional quality compared to extrusion blow moulding. The process is ideal for both narrow and wide-mouthed containers and produces them fully finished with no flash.

The process is divided in to three areas:

Injection

The injection blow moulding machine is based on an extruder barrel and screw assembly which melts the polymer. The molten polymer is fed into a manifold where it is injected through nozzles into a hollow, heated preform mould. The preform mould forms the external shape and is clamped around a mandrel (the core rod) which forms the internal shape of the preform. The preform consists of a fully formed bottle/jar neck with a thick tube of polymer attached, which will form the body.

Blowing

The preform mould opens and the core rod is rotated and clamped into the hollow, chilled blow mould. The core rod opens and allows compressed air into the preform, which inflates it to the finished article shape.

Ejection

After a cooling period the blow mould opens and the core rod is rotated to the ejection position. The finished article is stripped off the core rod and leak-tested prior to packing. The preform and blow mould can have many cavities, typically three to sixteen depending on the article size and the required output. There are three sets of core rods, which allow concurrent preform injection, blow moulding and ejection.


APplastic s.r.o.

Nebory 465
739 61 Třinec
Česká republika

IČ: 27787028
DIČ: CZ27787028
Tel.: +420 558 322 805

Vedení společnosti
Martin Kavalčík - jednatel
mob.: +420 608 876 839

Simona Stryjová
asistentka jednatele
mobil:+420 777 100 833


Obchodní oddělení

Linda Burawová
marketing, nákup, fakturace
mob.: +420 777 100 839
e-mail: obchod@applastic.cz


David Konderla - prodej
mob.: +420 608 100 169
e-mail: konderla@applastic.cz


Servisní oddělení

e-mail: servis@applastic.cz
Jan Padyšák
hlavní servisní technik ČR, SK, PL
mob.: +420 777 100 291

Marek Haltof
servisní technik Morava
mob.: +420 778 085 560

Jiří Österreicher
servisní technik Čechy
mob.: +420 603 296 779


Partneři

TEDERIC, SML, VICTOR CN, ITECH COOLING SYSTEMS

ITECH